wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 54 / 102

Printing OxiTop
®
Control OC 110
54
ba31116e05 07/2014
8 Printing
Switch on the IR printer.
Point the controller at the printer:
When printing from the SAMPLE STATUS TYPE list ( sam-
ple management) or from the evaluation:
The controller transfers the report data of the selected sam-
ple to the IR interface.

Print date and print time

Sample number

Measured value: mean value, SD, n (with parallel samples)
or end value (with single samples)

Type and run duration, measurement range

More information is available for the samples started in the
BOD Special operating mode: Bottle volume, filling volume,
dilution, height, air pressure, temperature

Start date and start time, end date, ID number

If GLP is switched on: Note, GLP On

If the AutoTemp function is switched on:
Note, AutoTemp On

Curve(s) + BOD mean value or end value

With GLP On : List of the serial numbers of the measuring
heads allocated to the sample (only for samples started in
the
BOD Standard and BOD Special measuring modes)

With samples started in Pressure p operating mode:
Stored momentary values with call-up time