wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 48 / 102

Operating mode: Pressure p OxiTop
®
Control OC 110
48
ba31116e05 07/2014
7.4 Calling up all data
This function is used to call up the data of all measuring heads (no
matter in which measuring mode they were started).
To call up the data of individual measuring heads: see section 7.5
S
AMPLE MANAGEMENT
, page 50.
Displays

already used!
Confirm the - New

menu
item and hold the
controller to a free measuring
head (see above).
Return to the entry menu with -
Stop

start .
In the delivery state, the controller automatically makes space when
Start is selected if the measured value memory is full. To do this, it
deletes the oldest finished sample (if a finished sample is avail-
able). You can change this setting to “manual erase” (see section
9.4 S
ETTINGS
, page 59).
SELECT ACTION menu (com-
munication with the measuring
heads):
Preselected:
- Start sample .
- Call up all data
Point the controller at the measuring
heads:
Queries the data of all active
measuring heads in the scanner
mode.
The controller stores the data
obtained and updates the list of
the sample management.
Duration of a pass: approx. 3
seconds for 12 measuring
heads in a stirring system.
40 cm to 1 m
RUN/ENTER