wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 37 / 102

OxiTop
®
Control OC 110 Operating mode: BOD Standard / BOD Routine
ba31116e05 07/2014
37
5.5.2 Excluding a curve ( BOD Standard operating mode)
This function is used to temporarily exclude a single curve (e.g. an
outlier) from the evaluation and averaging of an overall sample.
The function "List of measuring heads“ (see section 5.4
SAMPLE STATUS TYPE
LIST
(
SAMPLE MANAGEMENT
), page 28) is used
to find leaky or defective single samples.
The curve is only excluded temporarily! The data stock of the
SAMPLE STATUS TYPE list ( sample management) does not
change. The excluded curve is present again when the call is
repeated.
Display of single curves:
Select curve.
Use <

><

> to select -
Exclude curve .
- Exclude curve is preselected.
- Back : Returns to the previous
menu.
Message
Curve excluded! .
Updated display (curve
excluded, mean value recalcu-
lated).
Use <PRINT> to print the
updated results with curves
(without the excluded curve).
RUN/ENTER
RUN/ENTER
RUN/ENTER