wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 36 / 102

Operating mode: BOD Standard / BOD Routine OxiTop
®
Control OC 110
36
ba31116e05 07/2014
5.5.1 Sample statistics ( BOD Standard operating mode)
Starting point:
Display of a single curve.
Changes to sample statistics.
The menu selection shown here
only appears if the number of
measuring heads (n) is at least
2.
If n = 1 pressing of <RUN/
ENTER> changes directly to the
cursor
interrogation.
RUN/ENTER
When jumping to the selection menu from “Show all curves“, the
menu item
- Exclude curve is not displayed.
Results of the finished sam-
ple:
Data of the current sample:

Mean value

SD: standard deviation
(from n = 3)

n: number of measuring
heads
<PRINT>
Printout of the results with
curves

end date

current mean value

n: number of measuring
heads
<PRINT>
Printout of the data (current
mean value, n, sample infor-
mation) with curve paths to
date
RUN/ENTER