wtw Multi 3430, Руководство по эксплуатации

Страница: 82 / 102

Operation Multi 3430
82 ba75865e02 12/2009
4.10.5 Options for data transmission
Via the USB-B interface you can transmit data to a PC. Via the USB-A
interface you can transmit data to a USB memory device. The following
table shows which data are transmitted to the interface in which way:
Note
The following rule applies: With the exception of the menus, shortly
pressing the
<PRT> key generally outputs the display contents to the
interface (displayed measured values, measuring datasets, calibration
records).
Data Control Operation / description
Current
measured values
of all connected
sensors Manual
z
With <PRT> .
z
Simultaneously with every
manual storage process
(see section 4.9.1).
Automatic, at
intervals
z
With <PRT
_
> .
Then you can set the trans-
mission interval.
z
Simultaneously with every
automatic storage process
(see section 4.9.2).
Stored measured
values Manual
z
Displayed dataset with
<PRT> after calling up from
the storage.
z
All datasets with the Output
to RS232/USB function.
For details, see section 4.9.3.
Calibration
records Manual
z
Displayed calibration record
with
<PRT> .
z
All calibration records with
<PRT
_
> .
For details, see section 4.10.
Automatic
z
At the end of a calibration
procedure.