wtw Multi 3430, Руководство по эксплуатации

Страница: 26 / 102

Operation Multi 3430
26 ba75865e02 12/2009
4.2.3 Navigation
Measured value display In the measured value display, you can
z
use <
S
><
T
> to select one of several connected sensors. The
selected sensor is displayed with a colored background.
The following actions / menus refer to the selected sensor
z
open the menu for calibration and measurement settings with
<MENU/ENTER> (short keystroke)
z
open the Storage & config menu with the sensor-independent set-
tings by pressing <MENU/ENTER
_
> (long keystroke, approx. 2 s).
z
change the display in the selected measuring window (e. g. pH
<−>
mV) by pressing <M> .
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
menus. The selection is made with the
<
S
><
T
> keys. The current
selection is displayed with a frame.
z
Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
<MENU/ENTER> .
Example:
z
Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
<MENU/
ENTER> . Subsequently, the setting can be changed with <
S
><
T
>
and <MENU/ENTER> . Example:
General
Interface
Clock function
Service information
Reset
System
22.09.2009 08:00