wtw IQ SENSOR NET System 2020 XT, Руководство по эксплуатации, Страница: 126 / 216

Settings/setup System 2020 XT C
ONNECT
5 - 14
ba75970e01 10/2012
Entering the name of a
measuring location
The name of the measurement location is displayed in the line with the
name of the display. 15 characters are available for the name of the
measurement location.
Selecting sensors for the
measured value display
on the measurement
location
The measured value display provides the option of displaying either all
sensors or a selection of sensors (see section 4.5.4).
As soon as a terminal is docked on any MIQ module, the selected sen
-
sors at the measurement location are displayed. All sensors for the dis
-
play at the measurement location are activated in the delivery state.
The sensors are selected in the
Location display
menu. This selection
is stored in the MIQ module on which the terminal is docked.
3 Press <

> to select the name of the display,
Location
display
and confirm with <OK>.
4 Press <

> and <OK> to enter the location name and
finally confirm with <OK> (see also section 4.3.2).
5 Select and confirm sensors for the local measured value dis
-
play with <

> and <OK>. This sets or removes a tick
(
✔
) for the individual sensors.
Sensors selected for the display are marked with a tick (
✔
).