wtw IQ SENSOR NET System 2020 XT Скачать руководство пользователя страница 179

Страница: 179 / 216

System 2020 XT C

ONNECT

Maintenance and cleaning

9 - 1

ba75970e01

10/2012

Maintenance and cleaning

9.1

Maintenance

Maintenance activities

9.2

Cleaning

MIQ modules and control

units

Clean components mounted in the open of gross contamination as nec

essary. We recommend to clean the worst of the dirt on the MIQ mod

ule and the area around it each time before opening in order to prevent

gross contamination from entering the open enclosure.

To clean the module, wipe the enclosure surfaces with a damp, lint-free

cloth. If compressed air is available on site, blow off the worst of the dirt

beforehand. Keep the enclosure closed while doing so.

Note

The enclosure and the window of the display are made of plastic.

Therefore, avoid any contact with acetone or similar cleaning agents.

Any splashes must be wiped off immediately.

Note

Never use high-pressure cleaners to clean components of the

IQ S

ENSOR

IQ sensors

The cleaning of the IQ sensors depends greatly on the respective appli

cation. Instructions for this are given in the respective component oper

ating manual.

A valve module for the compressed air-operated cleaning of sensors is

available as an accessory.

Component

Maintenance

IQ sensors

Depending on the type of sensor

(see the component operating

manual of the sensor)

Other components

No maintenance required

Содержание IQ SENSOR NET System 2020 XT
























































































































































































































Результаты поиска

Содержание IQ SENSOR NET System 2020 XT

Отзывы:

wtw IQ SENSOR NET System 2020 XT, Руководство по эксплуатации, Страница: 179 / 216

Результаты поиска

Содержание IQ SENSOR NET System 2020 XT

Отзывы: