wtw inoLab Multi 9310 IDS, Руководство по эксплуатации

Страница: 80 / 114

Settings inoLab
®
Multi 9310 IDS
80
ba75937e10 08/2021
10.6.2
Data storage
This menu contains all functions to display, edit and erase stored measured
values.
10.6.3 Automatic
Stability control
The automatic
Stability control
function continuously checks the stability of the
measurement signal. The stability has a considerable impact on the reproduc-
ibility of measured values.
You can activate or switch off the automatic
Stability control
function (see
section 10.6 S
ENSOR
-
INDEPENDENT SETTINGS
, page 79).
The measured parameter flashes on the display
 as soon as the measured value is outside the stability range
 when the automatic
Stability control
is switched off.
10.6.4 Automatic switch-off function
The instrument has an automatic switch-off function in order to save the
batteries (see section 10.6.1 S
YSTEM
, page 79). The automatic switchoff func-
tion switches off the meter if no key is pressed for an adjustable period.
The automatic switchoff function is not active
 if the power pack is connected
 if a USB-B cable is connected
 if the
Automatic data storage
function is active, or with
automatic data trans-
mission
System
/
Clock function Date format
Datum
Time
Settings of time and date.
For details, see section 4.5.5 E
XAMPLE
2
ON NAVIGA
-
TION
: S
ETTING THE DATE AND TIME
, page 25
System
/
Service informa-
tion
Hardware version and software version of the meter
are displayed.
System
/
Reset
- Resets the system settings to the default values.
For details, see section 10.7.2 R
ESETTING THE SYS
-
TEM SETTINGS
, page 83
Menu item Possible setting Explanation
Detailed information on the memory functions of the Multi 9310 IDS
are given in section 11 D
ATA STORAGE
, page 84.