wtw inoLab 740, Руководство по эксплуатации

Страница: 159 / 274

BOD
159
Saving the routine
9.2.3 Stopping the BOD measurement
You can stop the measurement process at any time during
a start measurement or end measurement.
Note
The data of the start measurement are retained when an
end measurement is stopped.
45 Swap between the entry fields with [Next] .
46 Enter a name for the routine with
82
or an external
keyboard.
47 Confirm the entry with [Ok] .
The start measurement is completed and the data
are stored as a routine using the name entered.
1 Initiate the stopping of the measurement with [ESC]
or with
m
.
A security prompt appears
2 Select Yes for the security prompt with [Next] .
3 Confirm the stopping with
g
.
The entries and measurements made up to now are
deleted.