wtw DIQ/S 282, Руководство по эксплуатации, Страница: 73 / 186

DIQ/S 28X Operation
73
ba77168d02 03/2017
4.7 Status info of sensors and outputs
The display of the instrument status provides a simple overview of the current
modes of sensors (sensor info) and outputs in the IQ S
ENSOR
N
ET
.
The status display can be reached in the Einstellungen/Settings / Service / List of
all components menu (see section 4.10).
Fig. 4-16 List of all components
with sensor info
1 Call up the measured value display with <M> .
2 Using <

> , highlight a sensor and confirm with <OK> .
The Display/Options menu opens.
3 Using <

> , highlight the menu item, Calibration history of
selected sensor , and confirm with <OK> .
The calibration history with the results of the last calibration procedures
opens.
4 Exit the Calibration history of selected sensor overview with <M> .
1
Call up the
List of all components (see section 4.10).
2 Highlight the required component with <

> and confirm with
<OK> .
 Output module: The Status of output channels window opens up (for
details, refer to the operating manual of the output module).
 Sensor: The sensor info opens up (for details, refer to the operating
manual of the selected sensor).
3 Exit the Status of output channels window with <M> or <ESC> .