manualshive.com logo in svg

wtw DIQ/S 282, Руководство по эксплуатации, Страница: 33 / 186

Поделиться
Скачать
wtw DIQ/S 282 Скачать руководство пользователя страница 33

DIQ/S 28X

Installation

33

ba77168d02

03/2017

Mounting the 

DIQ/

S 28X on a top hat

rail

Fig. 3-9

Mounting the DIQ/S 28X on a top hat rail

3.7.5

 

Panel mounting

Variants of the DIQ/S 28X without fieldbus or Ethernet interface can be mounted 
to a switch panel with the PMS/IQ mounting set.

For variants of the DIQ/S 28X with fieldbus or Ethernet interface, we recom-
mend using the PMS/IQ-X mounting set. It enables to mount the DIQ/S 28X in 
the switch panel so that the fieldbus or Ethernet interface is accessible behind 
the switch panel. 

1

Screw the clamping assembly (pos. 1 in Fig. 3-9) on the back of the uni-
versal transmitter with the two plastic tapping screws (pos. 2).

2

Attach the universal transmitter to the top hat rail from above using the 
clamping assembly and press against the rail until the clamping assem-
bly clicks into place. The universal transmitter can be moved sideways 
afterwards.

3

To unhook the universal transmitter, press it downward and pull it for-
ward at the bottom.

1

2

Содержание DIQ/S 282



























































































































































































Отзывы:

Нет отзывов