wtw DIQ/S 181, Руководство по эксплуатации, Страница: 63 / 104

DIQ/S 181
The SETTINGS menu
63
ba77083e01 02/2015
5.5 System
The settings in the SYSTEM menu comprise:

Date/Time

Pressure/Altitude
This setting is important if you want to carry out D.O. measurements
with the universal transmitter DIQ/S 181.
(adjustable range: 500 ... 1100 mbar or 0 ... 5955 m altitude).

Settings
a
/
z?
Here you can configure the password for the settings.
For details on the passwords, refer to section 4.6.

Calibrate
a
/
z?
Here you can configure the password for calibration.
For details on the passwords, refer to section 4.6.

Display contrast
Here you can set the display contrast for optimum readability.

Delivery state
Here you can reset all settings to the default values. Only the date,
time and contrast setting for the display will remain stored. If the set-
tings password is active, a password prompt appears before the
reset. In any case a security prompt appears to prevent an inadver-
tent reset.
Default settings
Settings Default values
Language German
Pressure/Altitude 1013 mbar / 0 m
Settings password 1000 / inactive
Calibration password 1000 / inactive
Sensor settings Sensor dependent (see settings
tables in the respective sensor
operating manual).
Note: Calibration of the sensor is
stored in the sensor and is
retained when the system config-
uration is reset.
Relay outputs No function, all links are erased
Current outputs No function, all links are erased