wtw Cond 3310 IDS, Руководство по эксплуатации

Страница: 8 / 58

Overview Cond 3310 IDS
8
ba77051e04 07/2017
1.2.1 IDS sensors
IDS sensors
 support the automatic sensor recognition
 show only the settings relevant to the specific sensor in the setting menu
 process signals in the sensor digitally so that precise and interference-free
measurements are enabled even with long cables
 facilitate to assign a sensor to a measured parameter with differently colored
couplings
 have quick-lock couplings with which to fix the sensors to the meter.
Sensor data from
IDS sensors
IDS sensors transmit the following sensor data to the meter:

SENSOR ID
– Sensor name
– Sensor series number

Calibration data
– Calibration date
– Calibration characteristics
– Calibration interval
– Cell constant (IDS conductivity sensors only)
– Calibration history of the last 10 calibrations

Measurement settings (IDS conductivity sensors only)
– The set measured parameter
– The set reference temperature
– The set temperature coefficient
– The set TDS factor
The calibration data are updated in the IDS sensor after each calibration pro-
cedure. A message is displayed while the data are being updated in the sensor.
1.2.2 Wireless operation of IDS sensors
With the aid of the adapters in the IDS WLM System, IDS sensors with plug
head connectors (variant P) can be wirelessly connected to your
Cond 3310 IDS.
Note
In the measured value display, you can display the sensor
name and series number of the selected sensor with the [Info]
softkey. You can then display all further sensor data stored in
the sensor with the [More] softkey.