2-6
Unit Description
2.5. RSM-16R16 Series - Front Panel
As shown in Figure 2.8, the RSM-16R16 series front panel includes the following
components:
Phone Line Port (Internal Modem Port):
When the Internal Modem is present, the
phone line port is used for connection to your external phone line.
Network Ports:
Two Ethernet ports for connection to your primary and secondary
10Base-T or 100Base-T, TCP/IP networks. Note that the RSM-16R16 features a
default, IPv4 format IP address (192.168.168.168). This allows you to connect
to the unit without first assigning an IP address. The Network Ports also include
two LED indicators for Link and Data Activity. For more information on port
configuration, please refer to Section 5.9.
Notes:
• The left Network Port is ETH0; the right Network Port is ETH1.
• When connecting a single network cable to an RSM-16R16 series unit (Dual
Ethernet Ports,) make certain to connect to Port ETH0.
Serial Ports:
For connection to console ports on target devices. Standard RJ45
connectors configured as DCE ports. For more information on connecting devices
to the serial ports, please refer to Section 4.5 and Appendix B and Appendix C.
Ã
Port Activity Indicators:
A series of LEDs, which will light when a CTS signal is
detected and flash during data transmission to indicate activity at the port.
RESET Button:
Restarts the RSM-16R16 as described in Section 2.11.
DEFAULT Button:
Switches all plugs Off or sets plugs to default values as
described in Section 2.11.
ON Indicator:
Lights when AC Power is applied to the unit.
RDY Indicator:
(Ready) Flashes to indicate the unit is ready to receive commands.
DCD Indicator:
The Data Carrier Detect indicator.
Plug Activity Indicators:
A series of sixteen LED indicators which light when
power is applied to the corresponding switched outlet.
Note:
Providing that power is still present at the secondary power inlet for a
given branch, the Plug Activity indicators for that branch will blink on and off
when the primary power source for that branch is lost or disconnected.
www.wti.com
RSM-16R16
Remote Site Manager
+
Power Control
SET UP
SERIAL PORTS
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
PLUG ACTIVITY
PORT ACTIVITY
STATUS
ACT
LNK
ACT
LNK
Ethernet 0
Ethernet 1
PHONE
RST DEF
ON RDY DCD
1
3
5
7
9 11 13 14
2
4
6
8 10 12 14 16
A1 A2 A3 A4 A5 A6 A7 A8
B1 B2 B3 B4 B5 B6 B7 B8
1
2
3
4 5 6 7 8
9
10
Figure 2.8: RSM-16R16 Series - Front Panel
