manualshive.com logo in svg

WTI RSM-8R4-1, Руководство пользователя, Страница: 36 / 179

Поделиться
Скачать
WTI RSM-8R4-1 Скачать руководство пользователя страница 36

5-13

Basic Configuration

5.3.3.2.  The Temperature Log

The System Parameters menu allows you to either enable or disable the Temperature 
Log.  When the Temperature Log is enabled, the RSM-8R will not log temperature 
readings.  In the default state, the Temperature Log is enabled.

5.3.3.3.  Reading, Downloading and Erasing Logs

To read or download the status logs, proceed as follows:

• 

Text Interface:

  Type 

/L

 and press 

[Enter]

 to access the Display Log menu.  Key in 

the number for the desired option, press 

[Enter]

, and then follow the instructions in 

the resulting submenu.

• 

Web Browser Interface:

  Move the cursor over the "Logs" link on the left hand side 

of the screen.  When the flyout menu appears, click on the desired "Download" or 
"Display" option.

To erase log data, access command mode via the Text Interface, using an account that 
permits Administrator level commands, then type 

/L

 and press 

[Enter]

 to access the 

Display Logs menu and then proceed as follows:

• 

Audit Log:

  At the Display Logs menu, key in the number for the Audit Log option 

and then press 

[Enter]

.  When the Audit Log menu appears, key in the number for 

the Erase function, then press 

[Enter]

 and follow the instructions in the resulting 

submenu.

• 

Alarm Log:

  At the Display Logs menu, key in the number for the Alarm Log option 

and then press 

[Enter]

.  When the Alarm Log menu appears, key in the number for 

the Erase function, then press 

[Enter]

 and follow the instructions in the resulting 

submenu.

• 

Temperature Log:

  At the Display Logs menu, key in the number for the 

Temperature Log option and then press 

[Enter]

.  When the Temperature Log menu 

appears, key in the number for the Erase function, then press 

[Enter]

 and follow the 

instructions in the resulting submenu.

Notes:

•  The RSM-8R dedicates a fixed amount of internal memory for Audit Log 

records, and if log records are allowed to accumulate until this memory 
is filled, memory will eventually "wrap around," and older records will be 
overwritten by newer records. 

•  Note that once records have been erased, they cannot be recovered.

Содержание RSM-8R4-1




















































































































































































Отзывы:

Нет отзывов