2-3
Unit Description
2.3. RSM-8R8 Series - Front Panel Components
As shown in Figure 2.4, the front panel on RSM-8R8 series units includes the following
components:
Internal Modem Port:
For connection to your external phone line. For more
information on Modem Port configuration, please refer to Section 5.8.
Network Port:
An RJ45 Ethernet port for connection to your 10Base-T or
100Base-T, TCP/IP network. Note that the RSM-8R8 features a default IP address
(192.168.168.168). This allows you to connect to the unit without first assigning an
IP address. The Network Port also includes two LED indicators for Link and Data
Activity. For more information on port configuration, please refer to Section 5.9.
Serial Ports:
For connection to console ports on target devices. Standard RJ45
connectors configured as DCE ports. For more information on connecting devices
to the serial ports, please refer to Section 4.5 and Appendix B. For a description of
the serial port interface, please refer to Appendix A.1.
Activity Indicators:
A series of LEDs, which light to indicate data activity at the
corresponding RSM-8R8 Serial Port.
RESET Button:
Restarts the RSM-8R4 as described in Section 2.6.
DEFAULT Button:
Switches all plugs Off or sets plugs to default values as
described in Section 2.6.
ON Indicator:
An LED Indicator which lights when AC Power is applied to
the unit.
RDY Indicator:
(Ready) Flashes to indicate that the unit is ready to receive
commands.
DCD Indicator:
The Data Carrier Detect indicator.
Output Status Indicators:
A series of eight LED indicators which light when power
is applied to the corresponding switched outlet.
Note:
Providing that power is still present at the secondary power inlet, the
Output Status indicators will blink on and off when the primary power source is
lost or disconnected.
Ethernet
PHONE
ACT
LINK
www.wti.com
RSM-8R8
Remote Site Manager
+
Power Control
SET UP
SERIAL PORTS
1
2
3
4
5
6
7
8
ACTIVITY
1
2
3
4
5
6
7
8
RESET
DEFAULT
STATUS
ON RDY DCD
OUTPUT STATUS
1
2
3
4
5
6
7
8
1
2
3
4
5 6 7 8 9 10
Figure 2.4: RSM-8R8-1 & RSM-8R8-2 - Front Panel