manualshive.com logo in svg

WTI RSM-8R4-1, Руководство пользователя, Страница: 116 / 179

Поделиться
Скачать
WTI RSM-8R4-1 Скачать руководство пользователя страница 116

9-2

Operation

9.1.2.  The Plug Group Control Screen - Web Browser Interface

The Plug Group Control Screen is used to send switching and reboot commands to 
the user-defined Plug Groups.  As described in Section 5.6, Plug Groups allow you to 
specify a group of outlets that are dedicated to a similar purpose or client, and then 
direct switching commands to the group, rather than switching one plug at a time.

To apply power switching commands to Plug Groups, first access the RSM-8R 
Command Mode (see Section 5.1.)  Click on the "Plug Group Control" link on the left 
hand side of the screen to display the Plug Group Control Screen.  When the Plug 
Group Control Screen appears, click the down arrow in the "Action" column for the 
desired Plug Group(s), then select the desired switching option from the dropdown 
menu and click on the "Confirm Plug Actions" button

When the "Confirm Plug Group Actions" button is pressed, the RSM-8R will display a 
screen which lists the selected action(s) and asks for confirmation before proceeding.  
To implement the selected plug group action(s), click on the "Execute Plug Group 
Actions" button.  The RSM-8R will display a screen which indicates that a switching 
operation is in progress, then display the Plug Status screen when the command is 
complete.  At that time, the Status Screen will list the updated On/Off status of each 
plug.

Notes:  

•  When switching and reboot operations are initiated, Boot/Sequence Delay 

times and user-defined Plug Priority values will be applied as described in 
Section 5.7.

•  If a switching or reboot command is directed to a plug that is already in the 

process of being switched or rebooted by a previous command, then the 
new command will be placed in a queue until the plug is ready to receive 
additional commands.

•  When the Plug Group Control Screen is displayed by an account that permits 

Administrator or SuperUser command access, all user-defined Plug Groups 
will be displayed.

•  When the Plug Control Screen is displayed by an account that permits User 

or ViewOnly level commands, the screen will only include the Plug Groups 
that are allowed by the account.

Содержание RSM-8R4-1




















































































































































































Отзывы:

Нет отзывов