manualshive.com logo in svg

WTI RSM-8R4-1, Руководство пользователя, Страница: 112 / 179

Поделиться
Скачать
WTI RSM-8R4-1 Скачать руководство пользователя страница 112

8-7

The Status Screens

8.5.3.  The Temperature Log

The temperature log provides a record of RSM-8R temperature readings, in reverse 
chronological order, with the most recent events appearing at the top of the list.

To view the Temperature Log, access command mode using a password that permits 
Administrator or SuperUser level commands and then proceed as follows:

• 

Text Interface:

  Type 

/L

 and press 

[Enter]

.  The "Display Logs" menu will be 

shown.  At the Display Logs menu, key in the number for the Temperature Log, 
press 

[Enter]

 and then follow the instructions in the resulting submenu.

• 

Web Browser Interface:

  Place the cursor over the "Logs" link on the left hand side 

of the screen wait for the fly-out menu to appear.  When the fly-out menu appears, 
click on the desired option.

Содержание RSM-8R4-1




















































































































































































Отзывы:

Нет отзывов