Wraith ARS 2X Скачать руководство пользователя страница 6

 

Page 6 of 11 

 

DISPLAY

 

OPERATION 

RADAR

 

DISPLAY

 

PANEL 

 

The display of the 

Wraith ARS 2X

  has been completely redone to look more realistic whilst also giving the 

operator more information about what the radar system is currently doing.  

FUNCTIONS

 

OF

 

THE

 

DISPLAY

 

UNIT 

POWER BUTTON: 

The 

POWER

 button is a toggle switch that supplies the unit with power, the unit 

does not come on automatically with the patrol vehicle and must be manually 

turned on.  

TARGET WINDOWS:  

The two orange windows on the left are the target windows. The top window 

displays the strongest speed for the front antenna, and the bottom window 

displays the strongest speed for the rear antenna. When a speed is displayed in 

one of the target windows, an arrow to the right of the window lets the 

operator know the direction the target vehicle is traveling relative to the patrol 

vehicle.  

FAST/MIDDLE WINDOWS: 

The two red windows in the middle are multi-purpose windows, when the 

target windows are displaying a strong speed, the fast windows will display the 

faster target speed if there is one. The two icons to the left of the windows, 

FAST

 and 

LOCK

, are used to indicate the state of the middle windows. Whilst a 

speed is displayed in either the target or middle windows, if the operator 

presses the front or rear lock key, a speed will then be locked into the relevant 

middle window, with the 

LOCK

 icon also lighting up. Every time an operator 

locks a speed, it will be followed by a two-word voice enunciator that lets the 

operator know the antenna/direction, these include:  

FRONT/AWAY, 

FRONT/CLOSING, REAR/AWAY, REAR/CLOSING

.  

PATROL WINDOW:  

The green window to the right is the patrol window, whilst the patrol vehicle is 

stationary, the symbol “

[]

” will be displayed. When the patrol vehicle is 

moving, the speed will be displayed.  

 

ICON

 

DEFINITIONS 

XMIT: 

When the 

XMIT

  icon is illuminated, it means that the associated antenna is 

transmitting. When it is off, the fast window will display HLd, indicating the associated 

antenna is in hold mode and is not transmitting.  

SAME: 

When the 

SAME

 icon is illuminated, it means that the associated antenna is tracking 

targets in the same lane 

Target Zone

OPP: 

When the 

OPP

 icon is illuminated, it means that the associated antenna is tracking 

targets in the opposite lane 

Target Zone

FAST: 

When the 

FAST

 icon is illuminated, the associated fast target window will display faster 

targets captured by the radar. This will only be lit if the fast display is enabled in the 

operator menu. When the 

FAST

 and 

LOCK

 icons are illuminated, it indicates that a 

faster target speed has been locked. 

Содержание ARS 2X












Отзывы: