Wraith ARS 2X, Руководство оператора, Страница: 10 / 11

Page 10 of 11
CONFIGURING THE WRAITH ARS 2X
The Wraith ARS 2X includes a fully working operator menu that allows the operator to configure individual
options of the radar unit. It can be accessed by pressing the MENU button, the first option in the list of options
is displayed. Each time the
MENU
button is pressed, the next option and its setting are displayed, to change a
setting, use the ↑ and ↓ arrows.
Operator Menu Options Display
FASTER SPEED DISPLAY
The first press of the MENU button will load the menu and
display this option. With faster target speed display on, the
fast target windows will display the faster speed calculated
by the unit. When it is off, the unit will only display strong
target speeds. Press any of the four Target Zone buttons to
exit the Operator Menu.
SAME LANE SENSITIVITY ADJUSTMENT
This option allows you to change the sensitivity (range) for
the Same Lane mode. The ↑ and ↓ buttons are used to
cycle through the 5 settings: 1, 2, 3, 4, and 5. Lower values
are more appropriate for driving on the highway, with
higher values being better for monitoring traffic on long
roads. Press any of the four Target Zone buttons to exit the
Operator Menu.
OPPOSITE LANE SENSITIVITY ADJUSTMENT
This option allows you to change the sensitivity (range) for
the Opposite Lane mode. The ↑ and ↓ buttons are used to
cycle through the 5 settings: 1, 2, 3, 4, and 5. Lower values
are more appropriate for driving on the highway, with
higher values being better for monitoring traffic on long
roads. Press any of the four Target Zone buttons to exit the
Operator Menu.
BEEP AUDIO VOLUME
This option allows you to change the volume of the audible
beeps from the unit, t he ↑ and ↓ buttons are used to cycle
through the 6 settings: Off, 1, 2, 3, 4, and 5. The beep tones
are off when set to Off and loudest when set to 5. Press any
of the four Target Zone buttons to exit the Operator Menu.
VOICE ENUNCIATOR VOLUME
This option allows you to change the volume of the verbal
lock enunciator, t he ↑ and ↓ buttons are used to cycle
through the 6 settings: Off, 1, 2, 3, 4, and 5. The voice
enunciator is off when set to Off and loudest when set to 5.
Press any of the four Target Zone buttons to exit the
Operator Menu.