WPI PicoPump PV830, Инструкция по эксплуатации

Страница: 12 / 28

8 World Precision Instruments
(2) 5’ tubing
(4) 1.0mm pipette gaskets (green)
(4) 1.2mm pipette gaskets (black)
(4) 1.5mm pipette gaskets (red)
(4) 1.65mm pipette gaskets (white)
Handle Tubing
Tubing connected
to the barb
Body Gasket Cap
Pipette
Fig. 9—The 5430-ALL (version 2) must be properly assembled.
Before use, the superthane tubing must be slid through the handle and connected to
the barb of the body. Be careful so that the barb does not break when attaching or
removing the tubing. Before inserting the pipette, place a gasket of the correct size in
the cap.
Gasket Color Green Black Red White
Pipette Diameter (mm) 1.0 1.2 1.5 1.65
! WARNING: DANGER OF INJURY EXISTS IF THE PIPETTE IS INSECURE.
HIGH PRESSURE CAN CAUSE EJECTION AT HIGH VELOCITY.
Long lengths of tubing will tend to decrease the time response of the system due
to a loading effect of the increased volume. For fastest possible response, keep the
tubing length (and diameter) to the smallest possible value.
Vacuum Port
If this channel is to be used, connect the other PicoNozzle Kit to it exactly as
described above.