WPG QUADRA-TILT MRTA810CDC3O, Руководство по эксплуатации

Страница: 20 / 48

MRTA8-DC3: #35121AUS Rev 5.0/2-21 18
T
O
A
TTACH THE
P
ADS TO A
L
OAD
Make sure the contact surfaces of the load and vacuum pads are clean (see
“Pad Cleaning” ).
Positioning the Lifter on the Load
1)
1A
Center the pad frame on
the load (fig. 1A).
1
If the
lifter has tilt locks,
disengage them first.
2)
2A
Make sure all vacuum pads
will fit on the load and will
be loaded evenly (fig. 2A).
3) Place the vacuum pads in
contact with the load
surface.
1..... The lifter is designed to handle the maximum load weight when the load’s center of gravity is positioned within 2" [5 cm] of the lifter’s rotation
axis. Uncentered loads may rotate or tilt unexpectedly (as applicable).
OPERATION