WPG MT1010TDC, Руководство по эксплуатации

Страница: 5 / 37

Product
Description
Designed for use with hoisting equipment, MT1010TDC lifters support loads using vacuum and
manipulate loads using manual 90° tilt motions.
Model Number MT1010TDC
Vacuum Pads
(standard rubber
1
1...... Available with other rubber compounds for special purposes (see www.wpg.com) .
)
Ten 10" [25 cm] nominal diameter with replaceable sealing rings for rough or textured surfaces (Model
VPFS10T).
Pad Spread
(to outer edges)
33¼" x 77¾" [85 cm x 197 cm]
Maximum
Load Capacity
2
2...... The Maximum Load Capacity is rated at a vacuum of 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces with a friction coefficient of 1. Pad
compound, load rigidity, strength, surface conditions, overhang, angle, center of gravity and temperature can also affect the lifting capacity. A “qualified
person” should evaluate the effective lifting capacity for each use (see definition under
“Rated Load Test” ).
Per pad: 150 lbs [68 kg]
Total: 1500 lbs [680 kg]
Lifter
Weight
130 lbs [59 kg]
Vacuum Package
Weight
65 lbs [30 kg]
Power Source 12 volts DC, 26 amps
Battery Capacity 28 amp-hours
Tilt
Capability
Manual, 90°
Product
Options
Available with Center Spool Lift Bar.
See separate instructions about other options.
Operating
Elevation
Up to 6,000' [1,828 m]
Operating
Temperatures
32° — 104° F [0° — 40° C]
Service Life
20,000 lifting cycles, when used and maintained as intended
3
3...... Vacuum pads, filter elements and other wear-out items are excluded.
ASME Standard
BTH-1
Design Category "B", Service Class "0"
Troubleshooting
Guide
4
4...... To view this guide, click the link at right. Additionally, you can search for your lifter's Model Number at www.wpg.com and select the “Troubleshooting” link
on the product page.
TST-016_GENERIC_LEAK_TEST_rev_2014-086.pdf
Rev 17.2/12-21 MT-10TDC-HV-C: #35094 3
SPECIFICATIONS