Rev 5.2/9-16
22
MRTARC8-DC: #35076RC
T
O
T
ILT THE
L
OAD
WARNING: Always keep hands and fingers away from bars of tilt linkage.
Remember that the load requires more vertical space when tilted
to the upright position, as well as more horizontal space when
tilted to the flat position. Make sure there is sufficient clearance
for the load to tilt without contacting the operator or any nearby
objects. If the lifter is equipped with the optional tilt lock, also
make sure it is either disengaged or locked out (see OPERATION:
T
O
L
IFT AND
M
OVE THE
L
OAD
: About the Optional Tilt Lock). Then lift
upward or press downward on the lower control handles to tilt the
load as desired. Since the tilt linkage is designed to automatically
maintain the load in either the upright or the flat position, the
load force on the control handles changes direction during the tilt. If load size permits, maintain
control with the handles throughout the tilt. For loads with overhang, it may be necessary to
release the control handles as the load approaches the flat position. If so, keep the load under
control using hand cups or other appropriate means.
Содержание MRTARC811LDC
