WPG FL1HV11DC, Руководство по эксплуатации

Страница: 26 / 30

FL1-DC: #35026 Rev 6.0/11-20 24
Pad Cleaning
1)
1A
Regularly clean the face of the vacuum
pad (fig. 1A), using soapy water or
other mild cleansers to remove oil,
dust and other contaminates.
Never use harsh chemicals
on vacuum pad.
Solvents, petroleum-based products
(including kerosene, gasoline and
diesel fuel) or other harsh chemicals
can damage vacuum pads.
Never use rubber
conditioners on vacuum pad.
Many rubber conditioners can leave a
hazardous film on vacuum pads.
2) Prevent liquid from entering the
vacuum system through the suction hole on the pad face.
3) Wipe the pad face clean, using a clean sponge or lint-free cloth to apply the cleanser.
1
4) Allow the pad to dry completely before using the lifter.
1..... A brush with bristles that do not harm rubber can help remove contaminates clinging to sealing edges. If these cleaning methods are not
successful, contact WPG or an authorized dealer for assistance.
MAINTENANCE