Wow COOLIUS 4000 HP, Руководство пользователя

Страница: 14 / 32

12 - 32
3.3 Filling refrigerant into the internal bottle
The unit is supplied with no refrigerant inside. It is thus necessary to follow the below procedure to fill
the exact quantity of refrigerant into the refrigerant bottle.
1. Place the bottle containing refrigerant so that liquid refrigerant will come out (bottle with tube upright,
bottle without tube upside down).
2. Connect the male LP connection (supplied in the kit) to the refrigerant bottle (only in case the bottle is
not equipped with a connection).
3. Connect the quick coupler ref. 56 (blue) to the bottle containing refrigerant. Open the hand-wheel of
the coupler.
4. Open the 82 valve and close the 83 valve.
5. Make sure that the valve on the external bottle is closed.
6. Press the Vacuum key on the control module
7. Set a vacuum time of 5 minutes by means of the arrows
8. Press the key to start the function and wait for the end of it (beep)
9. Once the vacuum cycle is completed and you are back in the standby screen, slowly open the valve
of the bottle containing refrigerant
10. Press the Recovery key
11. Set the refrigerant quantity to recover (we suggest 5.000 kg) by means of the arrows
12. Press the key to start the function.
13. Wait until the recovery cycle is completed. A beep will let the user know that the cycle is over and the
quantity of recovered refrigerant will be displayed.
IMPORTANT !
In this moment, there is refrigerant in the hoses. Continue the procedure in order to prevent gas
dispersion in the environment
14. Close the valve on the bottle containing refrigerant
15. Start a new recovery cycle set on ALL
16. Press the key to start the function.
17. Wait until the recovery cycle is completed; a beep will let the user know that the cycle is over and the
quantity of recovered refrigerant will be displayed.
18. Disconnect the hose from the bottle
V a c u u m
T i m e 5
‘
R e c o v e r y
R 1 3 4 a 5 . 0 0 0 k g
R e c o v e r y
R 1 3 4 a A L L