Wouxun KG-XS20G Скачать руководство пользователя страница 21

Страница: 21 / 92

Installation and Setup

External Speaker

The KG-XS20G is equipped with a 3.5mm external speaker jack on the back of the

transceiver. It will accommodate a standard 8-ohm external speaker with a single pin

3.5mm mono audio plug. Stereo plugs will only produce audio from one speaker. Au-

dio accessories with TRRS plugs are not recommended.

PC Programming Port

The KG-XS20G has an RJ45 data port on the rear panel of the unit for use with an

optional PC programming cable such as the Wouxun Mobile Radio USB Programming

Cable (PCO-003). To access the data port, loosen the two screws and remove the pro-

tective cover. Refer to the illustration on page 17 for the exact location of the port.

Hand Microphone Installation

The hand speaker microphone port is located on the lower left side of the front panel.

To connect the hand mic to the transceiver, plug the 8-pin connector into the port and

tighten the screw ring all the way onto the connector. Do not overtighten.

Содержание KG-XS20G





























































































Результаты поиска

Содержание KG-XS20G

Отзывы:

Бренды по названию

Популярные бренды

Wouxun KG-XS20G, Руководство пользователя

Результаты поиска

Содержание KG-XS20G

Отзывы:

Бренды по названию

Популярные бренды