35
Operation
Operation
CAN menu item. Press [MENU] again to enter the menu item and the first tone or
code on the list will display on the screen. Keep this menu item open to scan.
The scan will begin when a signal is received. The scan will stop when the signal ends
and resume from where it left off the next time the signal is received, until it identifies
the correct tone. Use the [UP]/[DOWN] arrow keys to scan in a different direction.
Use the [PF2] side key to toggle between scanning the standard CTCSS, positive DCS,
and negative DCS tone list. See the TONESCAN menu item (page 52) for more
information.
Key Lock
The buttons on the KG-S88G can be locked to prevent them from being accidentally
pressed. When the Key Lock is enabled, all buttons except the [*LOCK] and PTT keys
will be disabled.
To activate the Key Lock, press and hold the [#LOCK] key for two seconds. The key
icon will appear at the top of the display. The buttons are now disabled.
To disable the Key Lock, press and hold the [#LOCK] key for two seconds. The key
