25
Installation and Setup
Installation and Setup
External Speakers
The KG-1000M is equipped with two 3.5mm external speaker jacks on the back of the
transceiver. Connecting speakers to one or both of these ports will direct audio to the
external speaker instead of the speaker inside the radio body.
The sound from areas “A” and “B” are output separately, allowing you to install a differ-
ent speaker for each area. The rubber speaker port cover has labels embedded over each
port. The port labeled “1” corresponds to the audio output for Area “A” and the port
labeled “2” corresponds to Area “B”.
To have all audio directed to a single external speaker, a 3.5mm Y-adapter is required.
The Y adapter will need two 3.5mm male connectors and one 3.5mm female connector.
The radio must be powered off/on after
external speakers are connected before
they will become active.
External speaker
