14
Installation and Setup
Transceiver Installation
Choose a safe place inside your vehicle to install the transceiver, considering a location
that would not cause harm to passengers while the vehicle is in motion or in case of an
accident or sudden braking. Install the transceiver in an area with good ventilation and
away from direct exposure to the sun.
1. Use the supplied self-tapping screws to
install the support bracket in the vehicle.
2. Set the transceiver in the bracket, then
insert the supplied combined screws and
tighten, ensuring that the screws are
fastened tightly. This will ensure the
support bracket and the transceiver
do not become loose when the vehi-
cle hits bumps or shakes.
Self-Tapping screws (4)
Specification: 5x16
Screw washer
