Worx WA3877 Скачать руководство пользователя страница 4

Dual Port Battery Charger  

EN

4

CHARGING PROCEDURE

NOTE:

 Before using the tool, read the 

instruction book carefully.

CHARGING INSTRUCTIONS

1. CHARGING YOUR BATTERY PACK

This charger is designed to charge one or two battery 
packs together or in a row.

WARNING:

The charger and battery pack are specifically 

designed to work together so do not attempt to use 
any other devices to charge. Never insert or allow 
metallic objects into your charger or battery pack 
connections because an electrical failure and hazard 
will occur.

2. BEFORE USING YOUR CORDLESS TOOL

Your battery pack is UNCHARGED and you must 
charge once before use.

3. HOW TO CHARGE YOUR BATTERY PACK

CHARGING PROCEDURE

1)  Plug the charger into an appropriate outlet. 
2)  Slide one battery pack or two battery packs into 

the charger. Normally, the relevant indication 
lights (2) will flash in green color showing the 
battery is being charged.

3)  This is a dual-port charger and it has 2 charging 

modes, Dual-Charging (default) and 1-by-1 
charging.

3.1   Dual-charging mode,  for 2 battery packs to be 

charged at the same time, the charger charges 
both battery packs simultaneously.

3.2   1-by-1 charging mode, for reducing waiting 

time to complete 1 battery pack charging first. 
The charger charges the higher residual capacity 
battery pack first until fully charged then the 
charger charges the other battery.

4)  Either of the two charging modes can be selected 

by pressing Charging Mode Selector (3).

WARNING: When battery charge runs 

out after continuous use or exposure 

to direct sunlight or heat, allow time for the 

battery to cool down before re-charging to 

achieve the full charge.

CHARGING INDICATOR LIGHTS

This charger is designed to detect problems that 

can rise with battery packs. Indicator lights indicate 

problems (see table below). If this occurs, insert a 

new battery pack to check. If the new battery pack 

charges correctly, then the original pack is defective 

and should be returned to a service center or recycling 

service center. If the new battery pack displays the 

same problem as the original battery pack, have the 

charger tested at an authorized service center.

Light

ON/OFF 

flash

Status

Green on

Fully Charged

Green flash

- -  -  -  -  -

Charging

Red on

Defective Battery

Red flash

 -  -  -  -  -

Battery Temperature 

Protection

The temperature of 

battery pack is less 

than 32

o

F (0

o

C) or more 

than 113

o

F(45

o

C).

DEFECTIVE BATTERY PACKS

This charger will detect a defective battery pack. 
When a defective battery pack is inserted into the 
charger, the charger will try to repair it. This process 
will last about 30mins (the light will be green and 
flash). If the repair is successful, the charger will 
automatically begin to charge the battery pack to the 
highest capacity possible (the light will be green and 
flash). If the light becomes solid red, then the battery 
pack is dead, and should be returned to a service 
center or recycling service center.

NOTE: 

Repaired battery packs are still usable but 

should not be expected to perform as much work as 
new battery packs.

BATTERY TEMPERATURE PROTECTION

This charger has a battery temperature protection 
feature. When the charger detects a battery pack that 
is too hot or cold (the light will be red and flash), it 
automatically activates the protection circuit, and 
suspends charging until the battery pack has reached 
the correct temperature. The charging process will 
then automatically begin (the light will be green and 
flash). This feature ensures maximum battery life.
 

LEAVING THE BATTERY PACK IN THE CHAR-

GER

If a fully charged battery pack is left in the charger, 
the light will remain green. The battery pack will 
remain charging with a maintenance trickle current.

IMPORTANT CHARGING NOTES:

1.  For a new battery pack or a battery pack that has 

been in storage for a long period, please recharge 
it before use. If you want to store the battery pack 
for a long time, please fully charge the battery 
pack to ensure maximum battery life.

2.  Longer life and better performance can be 

obtained if the battery pack is charged when 
the air temperature is between 65 and 75

0

Содержание WA3877







Отзывы: