WORMS JET100EX, Инструкция по эксплуатации

Страница: 34 / 52

34
3. PRE OPERATION CHECKS
■
Make sure you have read all the warnings to prevent any risk of fire.
■
Make sure there is no flammable or hazardous material next to the pump.
■
Keep away from any naked flame. Do not smoke.
■
Install the pump at least 1 meter away from any building.
■
Never block the air flow of the pump with paper or any other material.
■
Only use the pump outdoors.
3.1. SUPPLIED ACCESSORIES
The following accessories are supplied with your pump:
•
2 hose connectors [(a) Fig. 01] composed:
-1 lock nut;
-1 hose connection sleeve;
-1 sealing washer.
•
3 hose clamps; [(b) Fig. 01]
•
1 strainer; [(c) Fig. 01]
•
1 spark plug wrench; [(d) Fig. 01]
•
1 instruction for use paper [(e) Fig. 01]
3.2. CHECK OIL ENGINE LEVEL
■
Never remove the dipstick of the oil sump when the engine is running.
■
Never fill the oil sump up when the engine is running or hot.
■
Never smoke when filling the oil sump up or if, in the vicinity, there are naked flames or if any
other conditions are met to start a fire.
Make sure the pump is on a stable and flat surface:
1. Unscrew and remove the oil filling dipstick plug [(b) Fig. 02].
2. To check the oil level, clean the dipstick plug gauge, using a clean cloth and fit the oil plug back.
Do not screw it to check the oil level.
3. If the oil level is less than the bottom level [(d) Fig. 03], fill the oil sump with correct oil [Fig. 05]
up to the top mark [(c) Fig. 03].
Oil capacity (Top level)
P 52 EX 0,6 L
JET 100 EX 1 L