FR
EN
ES
IT
RO
41
TP 36 H / TP 65 H / TP 110 H
Operating Hours
Operation to perform
Each use
20 h
50 h
100 h
300 h Refer to
page
Sediment cup
Clean
○
43
Spark plug
Check, adjust
○
43
Replace
○
44
Spark arrester
Clean
○
(6)
Idle speed
Check, adjust
● (2)
(6)
Valve clearance
Check, adjust
● (2)
(6)
Combustion
chamber
Clean
● (4)
(6)
Fuel tank
Clean
○
(6)
Fuel filter
Clean
○
Fuel tubes
Check
● (5)
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are
mechanically proficient. Refer to Honda shop manual for service procedures.
(3) For commercial use, log hours of operation to determine proper maintenance intervals.
(4) Every 500 hours for TP 36 H et TP 65 H, and Every 1000 hours for TP 110 H.
(5) Every 2 years.
(6) N/A Workshop manual.
8. MAINTENANCE INSTRUCTIONS
8.1. CHANGING ENGINE OIL
JARD 7 H OHV : The engine oil must be changed for the first time following the first twenty (10)
operating hours. Then change engine oil every 50 hours.
TP 36 H / TP 65 H / TP 110 H : The engine oil must be changed for the first time following the first twenty
(20) operating hours. Then change engine oil every 100 hours..
Before replacing the oil, find out the best way to discard used oil. Never discard this oil in sewers, in
a garden or in waterways. Please refer to local discard and environment regulations as they provide
detailed instructions.
1. Unscrew the filling plug dipstick; [(b) Fig. 40 or 41]
2. Fit a container under the drain hole; [Fig. 42 or 43]
3. TP 36 H / TP 65 H / TP 110 H : Unscrew the drain plug; [(e) Fig. 05]
4. Let the oil flow when the engine is hot; [Fig. 42 or 43]
5. TP 36 H / TP 65 H / TP 110 H : Fit the drain plug and tighten it; [(e) Fig. 05]
6. Fill the engine in with oil [Fig. 07] so that the top level, on the filling plug, is reached; [Fig. 04 or
(c) Fig. 05]
7. Fit the oil dipstick and tighten it. [(b) Fig. 41]
