WorldViz PPT-E, Руководство по эксплуатации, Страница: 23 / 163

Hardware Installation
17
STEP 8:
The PPT system works best if the power box
and the PPT computer are plugged into the
same power source. So, connect the power
box to a power strip with an available outlet
for the PPT computer. Once you have
completed all the above steps, you may turn
on the power supply and test the cameras.
CONNECTING PPT-H CAMERA CABLES
Step 1:
The cameras used in PPT-H are smart
cameras operating at high resolution
and fast frame rates. The cameras are
able to automatically identify
themselves to the PPT software,
reducing configuration time.
Step 2:
Examine one of your cameras and note
that 4 of the 5 available ports will be
used in setup.