Worldlawn PYTHON WYP72BSV37EV5, Руководство оператора

Страница: 37 / 48

37
NEUTRAL ADJUSTMENT
If the hydro RTN requires adjustment, please refer
to the appropriate Hydro Gear service manual for
adjustment procedure.
MOTION CONTROL DAMPER ADJUSTMENT
Two positions are provided for installing the forward
damper stud to the motion control assembly. The
upper hole provides less resistance, the lower
provides more
.
MOTION CONTROL NEUTRAL LOCK PIVOT
ADJUSTMENT
The flanged nut can be adjusted to obtain a more
desired motion control lever resistance
Tighten or loosen the lower flanged nut to the
desired feel.
For more resistance, tighten the flanged nut.
For less resistance, loosen the flanged nut.
MOTION CONTROL HANDLE ADJUSTMENT
Adjusting the height:
The motion control levers can be adjusted higher or
lower for maximum operator comfort.
1. Remove the two bolts holding the control lever
to the control arm shaft (A)
2. Move the control lever to the next set of holes
(B). Secure the lever with the two bolts.
3. Repeat the adjustment for the opposite control
lever.
Adjusting the Tilt
The motion control levers can be tilted fore or aft for
maximum operator comfort.
1. Loosen the upper bolt holding the control lever
to the control arm shaft.
2. Loosen the lower bolt just enough to pivot the
control lever fore or aft. Tighten both bolts to
secure the control in the new position.
3. Repeat the adjustment for the opposite control
lever.