ECRESO FM 100/300 W, user manual– 06/2015
Page 29
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
4.3.4.
Setting the MPX inputs
Click the "Audio Input" button:
Set the nominal level between -50 and +50 dBu
4.3.5.
MPX configuration
Click the "Modulator" button:
Set the audio type to:
o
STEREO
o
MONO
Set the total deviation between 0 and 150 kHz
Set the pilot deviation between 0 and 25.5 kHz
4.3.6.
Setting the analog or AES inputs
Click the "Audio Input" button.
Use LINE1 commands for analog inputs.
Use LINE2 commands for AES inputs.
Set the nominal level between -50 and +50 dBu
Set the pre-emphasis to 0, 50 or 75 µs depending on
your country (50 µs in Europe, 75 µs in the USA).
4.3.7.
Getting on air
1.
Disable the RF by unchecking the RF box on the main page.
2.
Make sure the RF indicator LED is off.
3.
Disconnect the load and connect the antenna to the transmitter RF output.
4.
Enable the RF again by checking the RF box on the main page.
