ECRESO FM 100/300 W, user manual– 06/2015
Page 24
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
4.2.2.
Input selection
G O
T O
-> I N P U T S W I T C H >
1
I N P U T
S E L E C T
-> M O D E : M A N U
1
I N P U T
S E L E C T
-> M A I N : L I N E 1
1
G O
T O
M A I N
-> I N P U T
S E L
Press the “+” key until you see the Input Select menu. Then
press the “Enter” key.
Browse through the Input Select menu using the “+” and “–”
keys to switch to manual mode.
Select the current input:
"LINE1" for analog (see sections 4.2.4 to 4.2.6)
"LINE2" for AES (see sections 4.2.4 to 4.2.6)
"MPX1" for MPX (see sections 4.2.3 and 4.2.6)
"MPX2" for MPX (see sections 4.2.3 and 4.2.6)
"PLAYER": µSD card (with Communication Pack only)
“GENE”: internal generator
Use the “Enter” key to switch to edit mode, the “+” and “–” keys
to adjust values and the “Enter” key to confirm.
Press the “+” key until you see this screen. When the Input Sel
menu is selected, press “Enter” to return to the list of menus.
