16. DATA TRANSFER AND MEMORY MANIPULATION
16.1.1 Forma ng Memory
We highly recommend using the supplied USB flash drive and SD Card that is already forma ed. It might be
necessary to format any new Flash Drive or SD Card.
This can be done directly from the ADVANCED > MEMORY > SET FLASH DRIVE menu. The forma ed file system
is FAT32 with one par
on.
Warning
: Do not use other file system formats than default FAT32. Do not make more than one par
on
in the memory.
16.2 Mass Storage (USB OTG)
Workswell MEDICAS can be connected directly to PC or Mac with Micro USB cable and act as a Mass Storage.
Thus the data from connected memory can be accessed, copied, moved or deleted.
The MEDICAS must be started and running the whole me. When connected, the warning window on the MED-
ICAS display informing about the connec on should appear.
A er disconnec ng the MEDICAS will reboot itself.
Warning
: Only connect external host devices (PC/Mac) to USB Type Micro B slot on side of the device;
the rear USB Type A slot is only intended to be used with peripheral devices like the keyboard and Flash
Drives. Connec ng powered devices to the rear full sized USB slot could lead to permanent damage to
either device.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.2.0 EN, 28
th
May, 2020
All pictures are only for illustra on.
Real values may vary.
52
