15. DATA TRANSFER AND MEMORY MANIPULATION
15
Data Transfer and Memory Manipulation
Workswell GIS 320 system is equipped with internal SSD storage for captured images and recorded video. This
storage can be further extended and copied from using an optional SD Card and a Flash Drive.
There’s two ways of extracting recorded data from the device. Either through a direct connection to another
device acting as an USB Host is made, which makes the internal SSD accessible as a generic Mass Storage device,
or by using the removable SD Card or Flash Drive to transfer the files. Files can be either captured directly to
these removable media, or moved to them manually from the internal SSD storage.
15.1 Application Menu
Note
: Only still image capture can be done directly to the SD Card and Flash Drive external devices,
sequence recordings are always saved to the internal SSD storage and have to be either recovered via
USB transfer or copied to the external storage media manually.
All of the three storage media (SSD, SD Card, Flash Disk) can be managed within the menu through the options
ADVANCED > MEMORY > SET [SSD/SD Card/Flash Drive].
Figure 15.1: Storage manipulation submenu.
The memory management menu for the SD CARD and FLASH DRIVE have the following options:
COPY FROM SSD ‐ After scanning the SSD storage for available data, allows selective copy of folders containing
the captured images and sequences to the chosen external medium. Copied files are NOT removed from
the internal SSD storage.
MOVE FROM SSD ‐ After scanning the SSD storage for available data, allows selective move of folders
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 210427 EN, 27
th
Apr, 2021
All pictures are only for illustration.
Real values may vary.
57
