Workrite Ergonomics | 800.959.9675 www.workriteergo.com
#1500155 - Rev C
PA4000 - Poise Twin Assembly Instructions
(PA3000 - Poise - Heavy Duty Arm + PATWIN-B Wing Bracket)
Use these instructions for the monitor attachment step on page 5 of the Poise Heavy Duty instructions.
A
Wing Bracket
Qty: 1
C
M4x10mm Screw
Qty: 12
Attach Wing Bracket to Poise Arm
Remove Mounts (B) from Wing Bracket (A), then attach
Wing Bracket to the Poise - Heavy Duty forearm VESA 100
Mount using the four M4x10mm screws (C) (horizontal
orientation shown). Be sure to tighten securely. Attach
M4x8mm screw and washer (E) to lock pivot.
B
Monitor Mount
Qty: 2
D
M4x6mm Screw
Qty: 10
Note: It is strongly recommended to use the mounting screws provided by the monitor manufacturer. Due to the variety of monitor
mounting designs, the mounting holes at the back of the monitor might not be suitable for the M4 screws we have provided and could
cause damage to the Monitor.
!
1
2
Determine Mounting Configuration
There are five possible recommended configurations for
mounting - three with a horizontal orientation and two with
a vertical orientation. Choose the configuration you wish to
use, then orient your Mounts accordingly.
E
M4x8mm Screw and
Washer
Qty: 1 each
Horizontal
Vertical
When using
horizontal
orientation, be
sure Mounts
are positioned with two
fasteners at the top.
!
F
M4x18mm Screw
Qty: 8
G
⅜" Nylon Spacer
Qty: 8
Vertical
Horizontal
C
E
A
E
