*8100129*
8100129
Rev. A
4
Charge the battery.
The power adaptor may
be plugged directly into the WORKABOUT PRO.
The WORKABOUT PRO may also be charged
in a Docking Station.
Turn the unit on.
Press the red Enter/On key
for six seconds.
5
Resetting the unit
To warm-reset the WORKABOUT PRO:
·
Press the Blue FN key, the Orange FN key, and the Enter/On
key simultaneously for six seconds. The WORKABOUT PRO
cold-resets.
During a cold reset, running programs are halted and RAM
memory is cleared. The contents of flash memory and the
registry are preserved. The operating system is reloaded.
·
Press the Blue FN key and the Enter/On key simultaneously for
six seconds. The WORKABOUT PRO warm-resets.
During a warm reset, running programs are halted. The contents
of RAM, flash memory and the registry are preserved.
To cold-reset the WORKABOUT PRO:
Enter/On key
Blue FN key
Orange FN key
ISO 9001 Certified
Quality Management System
Hand-Held Computer
C Version
Quick Start Guide
March 16, 2007 PN: 8100129.A
To turn the WORKABOUT PRO off,
do one
of the following:
·
Press and release the Blue FN key, then press and release the
Enter/On key.
·
Select
Shut down
from the
Start
menu.
Important:
Resetting may result in data loss.
Install ActiveSync®.
Follow the onscreen instructions provided by
ActiveSync to establish a connection between
the host computer and the WORKABOUT PRO
in the Docking Station.
Configure ActiveSync.
Download ActiveSync® 4.5 or higher from
http://www.microsoft.com
and follow the
instructions to install it onto the host computer.
7
8
Connect the WORKABOUT PRO to the
host computer.
Connect using a Tether Port to
USB cable, or through a Docking Station.
6
6h
5 - 40 °C
Allow the WORKABOUT PRO to charge
for 6 hours.
41 - 104 °F
Note: Full battery performance is
only reached after the first few full
charge/discharge cycles.
Note: Use only the
universal AC power
adaptor approved by
Psion Teklogix for the
WORKABOUT PRO.
