SN8
USER MANUAL
VERSION 1.1
SN8
www.workpro.es
9
Safety cable
Pass the loop end over
the building feature.
Thread the tail wire
through the loop to
create a choke knot.
Pass the tip of the wire
through a hole in the
Gripple® locking device.
Adjust the desired height
by pressing the button
and sliding the locking
device at the same time.
Pass the tip of the wire
through a free hole of the
hanging point of SN8.
Pass the tip of the wire
through the free hole in the
locking device. Ensure a
minimum 75mm of tail wire
exit the hanger.
