Work Men 5411074181154, Оригинальное руководство пользователя

Страница: 15 / 28

Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
symbols :
Denotes risk of personal injury
or damage to the tool.
Read manual before use
Always wear hearing
protection
Always wear safety goggles
Always wear a dust mask.
In accordance with essential
applicable safety standards of
European directives
Double insulated
ADDITIONAL SAFETY-HINTS FOR SANDERS
Always wear safety-goggles and a dust-mask
during your work with the finishing-sander.
Always secure the work piece by clamps or else
to avoid slipping away.
Always keep the holes in the base plate clean
from dust.
Always connect a vacuum cleaner to the attached
Take special care when sanding lead based paint:
- All persons entering the work area must
wear a mask specially designed for
protection against lead paint dust and
fumes.
- Children and pregnant women must not
enter the work area.
- Do not eat, drink or smoke in the work
area.
Do not leave the tool running. Operate the tool
only when hand-held.
Ventilate your work area adequately when you
perform sanding operations.
Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage
may cause a personal injury.
Use the machine only for dry sanding.
Penetration of water into the machine increases
the risk of an electric shock.
Caution, fire hazard! Avoid overheating the
object being sanded as well as the sander.
Always empty the dust collector before taking
breaks.
In unfavourable conditions, e. g.,
when sparks emit from sanding metals, sanding
debris in the dust bag, micro filter or paper
sack (or in the filter sack or filter of the
vacuum cleaner) can self-ignite. Particularly
when mixed with remainders of varnish,
polyurethane or other chemical materials and
when the sanding debris is hot after long periods
of working.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplacee clean. Blends of
materials are particularly dangerous. Dust from
light alloys can burn or explode.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Never use the machine with a damaged cable.
Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working.
Damaged cables increase the
risk of an electric shock.