12
Getting started
Sense ll – 6 720 812 775 (2014/10)
4.4
More settings
If you require a room temperature for a period of time which differs from those in automatic mode:
Activate manual operation
and set the required room temperature
Manual operation
▶ Press the man key.
Manual operation is activated. The room temperature that is currently valid is
shown in a pop-up window in the lower part of the display. The time program bar
chart is displayed in bold.
▶ Wait a few seconds or press the selector to close the pop-up window.
▶ Turn the selector to set the required room temperature.
▶ Wait a few seconds or press the selector.
The room temperature that is currently valid is shown in a pop-up window in the
lower part of the display.
The controller operates with the modified settings.
Operating the appliance
Result
If you need hot water outside of the times set in the time program, activate the
Heating once
setting in the
Start now
menu
(= immediate hot water function).
▶ Press the menu key to open the main menu.
▶ Turn the selector to highlight
DHW
.
▶ Press the selector to open the
DHW
menu.
▶ Press the selector to open the
Heating once
menu.
▶ Press the selector twice to start the DHW heating.
The DHW heating is active immediately for the set duration. Depending on the
installed system, it may be necessary to select a DHW system (
DHW system I
or
II
).
If the DHW is too cold or too hot for you:
Change the DHW temperature
▶ Press the menu key to open the main menu.
▶ Turn the selector to highlight
DHW
.
▶ Press the selector to open the
DHW
menu.
▶ Turn the selector to highlight
Temperature settings
.
▶ Press the selector to open the
Temperature settings
menu.
▶ Turn the selector to highlight
DHW
or
DHW reduced
.
▶ Press the selector.
▶ Turn the selector to set the temperature.
▶ Press the selector.
The controller operates with the modified settings. Depending on the installed
system, it may be necessary to select a DHW system (
DHW system I
or
II
).
Setting the date and time
If the controller has been disconnected from the power supply for a prolonged period, it
will prompt the user to enter the date and time and then changes back to normal
operation.
▶ Restore the power supply.
The controller displays date settings.
▶ Turn the selector to set the day, month and year.
Continue
is highlighted in the display.
Table 8 Getting started – More settings
Operating the appliance
Result
Table 7 Getting started – Room temperature
6 720 815 237-08.1O
6 720 815 237-09.1O
6 720 815 237-10.1O
6 720 815 237-11.1O