Woody Valley X-ALPS, Руководство пользователя

Страница: 13 / 24

2.2- Harness adjustments
X-ALPS is supplied already adjusted to a standard ergonomic setting, apart from adjustments required for pilot height. Therefore, for the first
flight we recommend adjusting the harness for height alone, leaving the other settings unchanged, because they have proved to be
satisfactory for the vast majority of pilots. If you wish to change the other settings, remember that you can always return to the factory
settings by making reference to the red marks on all adjustment straps.
Please remember that the size of your X-ALPS harness should be chosen according to your height, and not according to seat width. Unlike a
harness based on a fundamentally seated position, in which the height of the seat back is not essential for good comfort, in this harness the
pilot flies in a more supine position, and so the height of the back support is very important for good comfort and a correct flying position.
Therefore it is important to select the right size, in particular as regards the height of the seat back, without worrying about the seat width.
To adjust the harness to the optimum position, we recommend simulating flight position by hanging the harness from a suitable fixed point,
therefore with all the items that you normally carry in flight inserted into the back pocket.
IMPORTANT:
- Before making any adjustments, the emergency parachute must be inserted.
- Every adjustment must be made symmetrically on both sides.
- Every adjustment strap has to be tight.
9