Woody Valley MK1 pro, Руководство пользователя

Страница: 13 / 50

MK1 PRO - User Manual
12
ENG
2.2 - Reserve parachute
The MK1 PRO is equipped with two reserve parachute containers located
under the seat on the front right and left.
The two containers have a variable volume for a sum of 15 litres; the vol-
ume of each individual container can change from 5 to 10 litres maximum.
Any type of parachute designed specifically for paragliding can be used. The
MK1 is not suitable for an external reserve parachute container.
We recommend that you observe the repacking intervals for your emergen-
cy parachutes and fill out the relevant documentation regularly.
The reserve parachute must be attached to the harness before being in-
serted in the built-in container. The connection takes the form of a dual
bridle and is fixed at two points at shoulder height to provide better load
distribution and to ensure a correct landing position in case the parachute
is deployed. This helps to minimize the risk of injury. The built-in bridge has
a central slot to which the parachute connects.
2.2.1 - Reserve parachute handles
MK1 PRO is supplied complete with four parachute extraction handles,
identified by No.24. Do not use other handles adapted for this purpose. The
black handle connection loop should be inserted in the deployment bag slot
and then the entire handle should be passed through the same loop in order
to obtain a tight connection. For easier deployment the connection loop on
the deployment bag must be positioned far from the reserve chute centre.
If your deployment bag does not have this loop please contact your reserve
parachute reseller.
CAUTION
If the inner container used is not supplied with the harness, the user must
check that the length between the handle and the container does not allow
entanglement with the parachute lines.