KV5710 Keyboard and Mouse Tray
Carton should contain the keyboard tray subassembly and a hardware kit consisting of:
4- #8 x
1
⁄
4
" self tapping screws
8- #8 x
5
⁄
8
" mounting screws
4- Adjustable mounting brackets with 7 position slots
Assembly, Mounting Installation Instructions
Step 1. Keyboard Preparation (Optional)
It is recommended, but is not required, to disas-
semble the slides from the tray for easier instal-
lation. This is easily done by first depressing the
plastic lever as shown in figure 1 and then
pulling the slide members apart. Repeat for
other slide.
Figure 1
Limited Lifetime Warranty
Knape & Vogt Manufacturing Company guarantees its drawer slides and builder’s hardware products
against failure or defects for so long as the purchaser or end user own them. This warranty is void if any
damage to the product is due to misuse, abuse, neglect, accident, improper installation or any used con-
trary to the instructions accompanying the product. This warranty covers the cost of the defective part
and not the cost of removal, installation or other incidental charges. The foregoing are the purchaser’s
exclusive remedies. Knape & Vogt Manufacturing Company, Attention: Customer Services Department.
The warranty set forth above is in lieu of any other warranties, express or implied, including warranties or
merchantability and fitness for use.
