Woodway ST PPS 43 Med, Руководство пользователя

Страница: 69 / 122

63 | UM-PP-EN-03
7.6 Using the Keypad
The keypad can be attached to a suitable point on the handrail so that the controls are easily
accessible to the runner. The magnetic mount makes it possible to remove the keypad from the
railing. In this way the runner's supervisor can use the keypad as a remote control.
Fig. 30 Keypad with magnetic mount
Switch device on as described in Section 7.5. Make sure that the emergency stop magnet is mounted
on the magnetic switch with its pull-cord, the clip is fixed to the runner's clothes, and that all
emergency stop buttons are released.
7.6.1 Button Functions
The buttons on the keypad are used for setting the speed and incline. The corresponding speed or
incline indicators are used for control. When the desired speed or incline has been reached, release
the button.
[+] [-] Buttons
With these buttons, the user can increase or decrease the speed. The running speed increases or
decreases continually as long as the button is pressed.
Watch the speed indicator on the display during the adjustment and release the button at the desired
speed.
[  ] [  ] Buttons
With these buttons, the user can adjust the incline of the device. The incline increases or decreases
continually as long as the button is pressed. Watch the incline indicator on the display. Release the
button at the desired incline.
STOP Button
The treadmill can be stopped with the STOP button. The gradual braking of the running surface speed
is comfortable, so the user still travels a few meters before the unit stops (depends on the previous
speed). If the running surface belt is stopped, the treadmill goes to the STOP mode. The incline is
maintained.
Pressing the STOP button a second time causes the treadmill - should it still be at an incline - to move
back to its starting position (0% incline). The treadmill remains in STOP mode.