Manual 37615C
SPM-D2-10 - Synchronizing Unit
© Woodward
Page 37/68
Chapter 7.
Configuration
In order to configure the device via a PC/Notebook please proceed as follows.
1.
Install Toolkit
*1
and the USB Driver for the SPM-D2 from the CD that is provided with the product or
from the webpage.
2.
Copy the *.wtool
*2
and *.sid
*2
file from the product CD to your PC or Notebook.
3.
Connect the PC or Notebook and the device via an USB cable.
4.
Start Toolkit
5.
Select “File –> open tool” and use the copied wtool file
6.
Click on the “connect button” and select the network type. The USB driver is listed as a COM port.
7.
“Toolkit” will establish the connection to the device and ask for a “SID” file. Please navigate to location
from the copied *.sid file.
8.
Now the communication with the device is active and measured values and parameter settings will be
displayed.
9.
Please note, that during the online communication all modified parameter will be automatically saved on
the device.
10.
Back up your settings by “Settings -> Save from Device to file”. A file with the extension “*.WSET”
will be written to your storage media.
11.
Remove the USB cable not before all settings are done and backed up.
*1
= To get the latest Toolkit software via the web:
http://www.woodward.com/software
Select ToolKit in the list and click the “Go” button.
Click “More Info” to get further information about ToolKit.
Choose the preferred software version and click “Download”
Login with your e-mail address or register first.
The download will start immediatly.
*2
= To get the configuration files (WTool and the SID) from the website:
http://www.woodward.com/software/configfiles
Insert the part number (P/N) and revision of your device into
the corresponding fields.
Select "ToolKit" in the “application type” list.
Click “Search” .
Download the file displayed in the search result.
The file is a ZIP archive which must be extracted for use
in ToolKit.
